{"users":[{"id":1,"username":"KyleGabriel","name":"Kyle Gabriel","avatar_template":"/user_avatar/forum.radicaldiy.com/kylegabriel/{size}/3_2.png","primary_group_name":"mycodo_dev","flair_name":"mycodo_dev","flair_url":"/uploads/default/original/1X/f2a79e24142c87e411531dbc6e9dc7f8e7d694fa.png","flair_group_id":43,"admin":true,"trust_level":2},{"id":820,"username":"ubernup","name":null,"avatar_template":"/letter_avatar_proxy/v4/letter/u/e480ec/{size}.png","trust_level":0},{"id":620,"username":"zmotii","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/z/ee7513/{size}.png","trust_level":1},{"id":645,"username":"ismailp","name":"Ismail Pehlevan","avatar_template":"/user_avatar/forum.radicaldiy.com/ismailp/{size}/1774_2.png","trust_level":1},{"id":754,"username":"Thomas.S","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/t/45deac/{size}.png","trust_level":1},{"id":672,"username":"mankey","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/m/779978/{size}.png","trust_level":1},{"id":520,"username":"TerronTek","name":"","avatar_template":"/user_avatar/forum.radicaldiy.com/terrontek/{size}/1987_2.png","trust_level":1},{"id":208,"username":"Theo","name":"Theo potgieter","avatar_template":"/letter_avatar_proxy/v4/letter/t/a87d85/{size}.png","trust_level":0},{"id":405,"username":"VitorFrost","name":"Vitor Frost","avatar_template":"/user_avatar/forum.radicaldiy.com/vitorfrost/{size}/689_2.png","trust_level":2},{"id":711,"username":"ofaydn","name":"","avatar_template":"/user_avatar/forum.radicaldiy.com/ofaydn/{size}/1944_2.png","trust_level":1},{"id":279,"username":"Lucid3y3","name":"","avatar_template":"/user_avatar/forum.radicaldiy.com/lucid3y3/{size}/461_2.png","trust_level":2},{"id":555,"username":"Scott_Guthrie","name":"Gu3","avatar_template":"/user_avatar/forum.radicaldiy.com/scott_guthrie/{size}/1182_2.png","trust_level":1},{"id":702,"username":"Myxo","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/m/2bfe46/{size}.png","trust_level":1},{"id":638,"username":"treesnsnacks","name":"Treesnsnacks","avatar_template":"/user_avatar/forum.radicaldiy.com/treesnsnacks/{size}/1725_2.png","trust_level":1},{"id":686,"username":"mahu","name":"","avatar_template":"/user_avatar/forum.radicaldiy.com/mahu/{size}/1863_2.png","trust_level":1},{"id":663,"username":"yannick","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/y/b782af/{size}.png","trust_level":1},{"id":667,"username":"Nico","name":"Nicolò Grasso","avatar_template":"/letter_avatar_proxy/v4/letter/n/b5a626/{size}.png","trust_level":0},{"id":594,"username":"Alpha","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/a/6a8cbe/{size}.png","trust_level":1},{"id":666,"username":"gossen","name":"Gossen","avatar_template":"/letter_avatar_proxy/v4/letter/g/919ad9/{size}.png","trust_level":0},{"id":596,"username":"flaco1","name":"Cecilio Zorrilla","avatar_template":"/letter_avatar_proxy/v4/letter/f/c0e974/{size}.png","trust_level":1},{"id":236,"username":"cello3","name":"marcel","avatar_template":"/letter_avatar_proxy/v4/letter/c/c4cdca/{size}.png","trust_level":2},{"id":632,"username":"danOS144","name":"Dan Os144","avatar_template":"/user_avatar/forum.radicaldiy.com/danos144/{size}/1709_2.png","trust_level":1},{"id":545,"username":"FlowerPower","name":"Ko","avatar_template":"/letter_avatar_proxy/v4/letter/f/b19c9b/{size}.png","trust_level":1},{"id":619,"username":"samuk","name":"Samuk","avatar_template":"/user_avatar/forum.radicaldiy.com/samuk/{size}/1664_2.png","trust_level":1},{"id":597,"username":"Talvara","name":"","avatar_template":"/user_avatar/forum.radicaldiy.com/talvara/{size}/1594_2.png","trust_level":2},{"id":379,"username":"BossMyco","name":"Jay","avatar_template":"/user_avatar/forum.radicaldiy.com/bossmyco/{size}/1490_2.png","primary_group_name":"patrons","flair_name":"patrons","flair_url":"/uploads/default/original/1X/4258ead798136f237d6379b4b1768419437a26dd.png","flair_group_id":41,"trust_level":2},{"id":625,"username":"jobroe","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/j/d9b06d/{size}.png","trust_level":1},{"id":610,"username":"Billjuv","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/b/7bcc69/{size}.png","trust_level":2},{"id":605,"username":"glass_monkey","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/g/ce7236/{size}.png","trust_level":0},{"id":573,"username":"clarkarbo","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/c/c68b51/{size}.png","trust_level":2},{"id":507,"username":"Ronald_Rigo","name":"Ronald Rigo","avatar_template":"/user_avatar/forum.radicaldiy.com/ronald_rigo/{size}/1029_2.png","trust_level":1},{"id":423,"username":"lalebarde","name":"Laurent","avatar_template":"/user_avatar/forum.radicaldiy.com/lalebarde/{size}/750_2.png","trust_level":1},{"id":548,"username":"rgraff","name":"RichardG","avatar_template":"/letter_avatar_proxy/v4/letter/r/e9a140/{size}.png","trust_level":1}],"primary_groups":[{"id":43,"name":"mycodo_dev"},{"id":41,"name":"patrons"}],"flair_groups":[{"id":43,"name":"mycodo_dev","flair_url":"/uploads/default/original/1X/f2a79e24142c87e411531dbc6e9dc7f8e7d694fa.png","flair_bg_color":"","flair_color":""},{"id":41,"name":"patrons","flair_url":"/uploads/default/original/1X/4258ead798136f237d6379b4b1768419437a26dd.png","flair_bg_color":"","flair_color":""}],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/mycodo/issue-bug/19?page=1","per_page":30,"top_tags":[{"id":16,"name":"input","slug":"input"},{"id":17,"name":"function","slug":"function"},{"id":18,"name":"output","slug":"output"},{"id":31,"name":"ph","slug":"ph"},{"id":21,"name":"camera","slug":"camera"},{"id":26,"name":"widget","slug":"widget"},{"id":50,"name":"question","slug":"question"},{"id":24,"name":"upgrade","slug":"upgrade"},{"id":48,"name":"fixed","slug":"fixed"},{"id":43,"name":"pump","slug":"pump"},{"id":44,"name":"action","slug":"action"},{"id":35,"name":"display","slug":"display"},{"id":8,"name":"mqtt","slug":"mqtt"},{"id":55,"name":"networking","slug":"networking"},{"id":28,"name":"ui","slug":"ui"},{"id":51,"name":"calibration","slug":"calibration"},{"id":32,"name":"ec","slug":"ec"},{"id":53,"name":"backup-restore","slug":"backup-restore"},{"id":63,"name":"bluetooth","slug":"bluetooth"},{"id":11,"name":"custom-module","slug":"custom-module"},{"id":19,"name":"hardware","slug":"hardware"},{"id":52,"name":"install","slug":"install"},{"id":30,"name":"temperature","slug":"temperature"}],"topics":[{"fancy_title":"About the Mycodo Issue/Bug category","id":47,"title":"About the Mycodo Issue/Bug category","slug":"about-the-mycodo-issue-bug-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2021-04-07T01:49:43.814Z","last_posted_at":null,"bumped":true,"bumped_at":"2022-06-06T15:00:43.742Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"A bug/issue means something is broken, preventing normal/typical use of Mycodo/software. Do be sure to search prior to submitting bugs. Include repro steps, and only describe one bug per topic please. \nOften what are fir…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":720,"like_count":0,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Issue installing highcharts for async graphs","id":2219,"title":"Issue installing highcharts for async graphs","slug":"issue-installing-highcharts-for-async-graphs","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-10-11T08:19:58.551Z","last_posted_at":"2026-10-11T08:19:58.787Z","bumped":true,"bumped_at":"2026-10-11T08:19:58.787Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"when installing highcharts dependencies the log shows: \nExecuting command: wget --no-clobber ``https://code.highcharts.com/zips/Highcharts-Stock-9.1.2.zip \nit never moves on to the next installation step. executing the s…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":14,"like_count":0,"has_summary":false,"last_poster_username":"ubernup","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":820,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Camera OpenCV dependency install issue","id":2214,"title":"Camera OpenCV dependency install issue","slug":"camera-opencv-dependency-install-issue","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-08-02T06:47:33.492Z","last_posted_at":"2026-08-02T06:47:36.582Z","bumped":true,"bumped_at":"2026-08-02T06:47:36.582Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am attempting to install the dependency for the camera module OpenCV. \nHowever, the dependencies do not install due to errors. \nAny ideas on how to correct this? \nThe install error message is displayed below: \nDevice: …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":50,"name":"question","slug":"question"}],"tags_descriptions":{},"views":32,"like_count":0,"has_summary":false,"last_poster_username":"zmotii","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":620,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Atlas Ph Ezo Experience Communication Problem Solved","id":2124,"title":"Atlas Ph Ezo Experience Communication Problem Solved","slug":"atlas-ph-ezo-experience-communication-problem-solved","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-06-25T17:55:52.343Z","last_posted_at":"2025-06-25T17:58:52.997Z","bumped":true,"bumped_at":"2025-06-25T17:58:52.997Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":":test_tube: Debugging Atlas Scientific pH Sensor with Mycodo on Raspberry Pi (I²C & UART Troubles)\nTL;DR \nMy Atlas Scientific pH EZO sensor worked fine with Mycodo on Raspberry Pi—until it didn’t. It suddenly stopped res…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"},{"id":31,"name":"ph","slug":"ph"}],"tags_descriptions":{},"views":89,"like_count":0,"has_summary":false,"last_poster_username":"ismailp","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":645,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dashboard - Error 500: Internal Server Error","id":2116,"title":"Dashboard - Error 500: Internal Server Error","slug":"dashboard-error-500-internal-server-error","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2025-05-18T12:53:15.270Z","last_posted_at":"2025-05-20T05:48:46.478Z","bumped":true,"bumped_at":"2025-05-20T05:48:46.478Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, when I try to save a widget in the dashboard I get the error, but seems that every thing is working fine. I have tried some things and deleted some widgets and now I get the error. All widgets are working. Restarted …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":82,"like_count":0,"has_summary":false,"last_poster_username":"Thomas.S","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":754,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Bug: Mijia LYWSD03MMC Dependency installation","id":2112,"title":"Bug: Mijia LYWSD03MMC Dependency installation","slug":"bug-mijia-lywsd03mmc-dependency-installation","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://forum.radicaldiy.com/uploads/default/optimized/2X/e/ef81217b28719a4aed08dd22c1d82382c35cc984_2_1024x238.png","created_at":"2025-04-28T22:53:21.327Z","last_posted_at":"2025-04-28T23:23:09.327Z","bumped":true,"bumped_at":"2025-04-28T23:23:09.327Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"STOP right now, and please first look to see if the issue you’re about to submit is already an open or recently closed issue at GitHub · Where software is built \nPlease DO NOT OPEN AN ISSUE: \n\nIf your Mycodo version is n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"}],"tags_descriptions":{},"views":90,"like_count":2,"has_summary":false,"last_poster_username":"mankey","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":672,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"PID Autotune not switching output off?","id":2066,"title":"PID Autotune not switching output off?","slug":"pid-autotune-not-switching-output-off","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2025-02-13T19:59:39.816Z","last_posted_at":"2025-03-19T01:59:19.715Z","bumped":true,"bumped_at":"2025-03-19T01:59:19.715Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Anyone experiecing a runaway output when using the PID Autotune feature? \nAfter enabling the Autotune, I’m watching the measurement climb until the logs say  “switched state down” but the output remains on and the measur…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":95,"like_count":1,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":520,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Inputs stop registering after some time, pyro5 error","id":2073,"title":"Inputs stop registering after some time, pyro5 error","slug":"inputs-stop-registering-after-some-time-pyro5-error","posts_count":7,"reply_count":0,"highest_post_number":7,"image_url":null,"created_at":"2025-02-27T19:33:39.674Z","last_posted_at":"2025-03-01T08:35:13.276Z","bumped":true,"bumped_at":"2025-03-01T08:35:13.276Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Everything was functioning correctly, then inputs seems to stop reading. Daemon log attached. \n2025-02-27 21:10:19,605 - INFO - mycodo.controllers.controller_conditional_e7f6c8b3 - This INFO log entry will appear in the …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"}],"tags_descriptions":{},"views":110,"like_count":0,"has_summary":false,"last_poster_username":"Theo","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":208,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Firefox blocking access: Secure Connection Failed","id":1258,"title":"Firefox blocking access: Secure Connection Failed","slug":"firefox-blocking-access-secure-connection-failed","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://forum.radicaldiy.com/uploads/default/original/1X/c916148a9f503db36cf23fd9c039818b9b8b5d94.png","created_at":"2022-11-18T18:49:38.836Z","last_posted_at":"2022-11-25T02:38:03.205Z","bumped":true,"bumped_at":"2024-12-24T09:02:18.256Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"When I try to open the web interface on the Firefox (Wibdows 10 machine), I am blocked and I can’t add it to trusted sites nor proceed accepting the risk or anything! \n  \nOn Chrome, I receive an alert, but I can accept t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":470,"like_count":1,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":405,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Can’t set sensor value","id":1996,"title":"Can't set sensor value","slug":"cant-set-sensor-value","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2024-11-07T12:56:35.258Z","last_posted_at":"2024-11-07T16:41:58.503Z","bumped":true,"bumped_at":"2024-11-07T16:41:58.503Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I try to implement a data fetching protocol to my system. The thing is I can succesfully retrieve data, I can see it in the Mycodo logs. But when I try to set this data to return_dict it just doesn’t. I don’t understand …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"}],"tags_descriptions":{},"views":85,"like_count":1,"has_summary":false,"last_poster_username":"ofaydn","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":711,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Web Cam Error - Could not acquired image from webcam feed","id":1967,"title":"Web Cam Error - Could not acquired image from webcam feed","slug":"web-cam-error-could-not-acquired-image-from-webcam-feed","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://forum.radicaldiy.com/uploads/default/original/2X/7/74bb33b8b5312a17e897ef6a34520ede15dbab56.jpeg","created_at":"2024-09-26T18:57:58.219Z","last_posted_at":"2024-10-05T23:43:47.949Z","bumped":true,"bumped_at":"2024-10-05T23:51:02.547Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Getting Error: could not acquired image from webcam feed. \n  \nThere’s a good chance I don’t have this configured properly.  Any idea where to look for the solution? \nWeb logs show the following: \n\nat Tue 2024-09-24 21…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":61,"like_count":0,"has_summary":false,"last_poster_username":"Scott_Guthrie","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":555,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"OpenWeather API input not working","id":1978,"title":"OpenWeather API input not working","slug":"openweather-api-input-not-working","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-10-03T00:10:41.874Z","last_posted_at":"2024-10-03T00:30:55.137Z","bumped":true,"bumped_at":"2024-10-03T00:30:55.137Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Seeing my previously working inputs were not functioning with no changes to my Mycodo setup and after switching to the OpenWeather One Call 3.0 API. I can’t seem to get the input to work. \nI am not very knowledgeable in …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"}],"tags_descriptions":{},"views":97,"like_count":0,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":702,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Ssd1309 oled function dependency libtiff5 wont install","id":1790,"title":"Ssd1309 oled function dependency libtiff5 wont install","slug":"ssd1309-oled-function-dependency-libtiff5-wont-install","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2024-02-11T19:08:54.995Z","last_posted_at":"2024-09-27T12:26:35.204Z","bumped":true,"bumped_at":"2024-09-27T12:26:35.204Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Trying to get a ssd1309 2.42 in Oled to work with mycodo but there seems to be a problem with one of the function dependencies. \n[2024-02-11 10:40:45] Dependency installation beginning. Installing: libtiff5 \n[2024-02-11 …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":17,"name":"function","slug":"function"}],"tags_descriptions":{},"views":292,"like_count":0,"has_summary":false,"last_poster_username":"mahu","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":638,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":686,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Issues with Input Configuration: ADS1115 Generic Analog pH/EC","id":1886,"title":"Issues with Input Configuration: ADS1115 Generic Analog pH/EC","slug":"issues-with-input-configuration-ads1115-generic-analog-ph-ec","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":"https://forum.radicaldiy.com/uploads/default/optimized/2X/0/02d1c5a42c77895eac4acc7d77e7c38e8e8a0376_2_1023x207.jpeg","created_at":"2024-06-11T07:59:57.821Z","last_posted_at":"2024-06-21T17:09:42.628Z","bumped":true,"bumped_at":"2024-06-21T20:00:10.028Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey Guys, \nI am experiencing issues with a low-cost pH probe connected to an ADS1115. The probe has been calibrated with two points and verified. However, I am encountering problems with the pH value calculations, which …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"},{"id":50,"name":"question","slug":"question"},{"id":31,"name":"ph","slug":"ph"}],"tags_descriptions":{},"views":337,"like_count":0,"has_summary":false,"last_poster_username":"Lucid3y3","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":663,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43},{"extras":"latest","description":"Most Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mycodo: all sensors readings 0","id":1889,"title":"Mycodo: all sensors readings 0","slug":"mycodo-all-sensors-readings-0","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2024-06-17T13:27:22.241Z","last_posted_at":"2024-06-18T14:47:34.222Z","bumped":true,"bumped_at":"2024-06-18T14:47:34.222Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello everyone, \nmy first topic on this forum, since I couldn’t find anything related in the log. \nI’m currently running MyCodo on three different indoor chambers on Rpi 4. It works fine on two of them, but there’s a nic…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":229,"like_count":0,"has_summary":false,"last_poster_username":"Lucid3y3","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":667,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"InfluxDB causes extreme CPU load","id":1698,"title":"InfluxDB causes extreme CPU load","slug":"influxdb-causes-extreme-cpu-load","posts_count":16,"reply_count":7,"highest_post_number":16,"image_url":null,"created_at":"2023-11-26T19:12:28.469Z","last_posted_at":"2024-06-15T04:27:07.846Z","bumped":true,"bumped_at":"2024-06-15T04:27:07.846Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI am on Mycodo 8.15.12 and everything worked fine after initial installation issues. Interface was always quite slow though. All of a sudden, without changing anything, my RasPi 3 A is basically not responding anymo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":786,"like_count":2,"has_summary":false,"last_poster_username":"Lucid3y3","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":594,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43},{"extras":"latest","description":"Most Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Notes not showing in graph","id":1885,"title":"Notes not showing in graph","slug":"notes-not-showing-in-graph","posts_count":4,"reply_count":1,"highest_post_number":5,"image_url":"https://forum.radicaldiy.com/uploads/default/original/2X/e/e67fc5900897b5f6ee624ca72ec33fa22dae00b5.png","created_at":"2024-06-06T10:14:32.209Z","last_posted_at":"2024-06-12T06:47:17.948Z","bumped":true,"bumped_at":"2024-06-12T06:47:17.948Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, \nI can’t get the Notes to show in the graph. Anyone has a clue? \nI’m using Mycodo 8.15.13, I’ve created a tag (Loods)  and a Note (test) and I setup the graph to show the notes with the tag Loods. See screensho…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":48,"name":"fixed","slug":"fixed"}],"tags_descriptions":{},"views":178,"like_count":3,"has_summary":false,"last_poster_username":"gossen","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":666,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Dependencies for Function - Conditional Controller","id":1645,"title":"Dependencies for Function - Conditional Controller","slug":"dependencies-for-function-conditional-controller","posts_count":9,"reply_count":4,"highest_post_number":20,"image_url":null,"created_at":"2023-10-19T17:47:46.909Z","last_posted_at":"2024-04-29T13:14:00.406Z","bumped":true,"bumped_at":"2024-04-29T13:14:00.406Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"good afternoon all I was having the same problem as Ronald_Rigo and the new release 8.15.11 fix that part of it but now im having the same issue this time with the conditional controller. \n [2023-10-19 16:37:11] Dependen…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":17,"name":"function","slug":"function"}],"tags_descriptions":{},"views":838,"like_count":3,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":596,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43},{"extras":null,"description":"Recent Poster","user_id":236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ERROR - mycodo.influx - Unknown Influxdb version:","id":1773,"title":"ERROR - mycodo.influx - Unknown Influxdb version:","slug":"error-mycodo-influx-unknown-influxdb-version","posts_count":26,"reply_count":4,"highest_post_number":27,"image_url":null,"created_at":"2024-01-31T06:03:01.256Z","last_posted_at":"2024-03-05T15:17:04.163Z","bumped":true,"bumped_at":"2024-03-05T15:17:04.163Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, \nI have a fresh installed Mycodo ( Mycodo 8.15.13 /influxDB v.1.8.10/ raspberry pi OS lite (32 bit) on a Raspberry zero W) \nFor testing i added the cpu-Load input and activated it. When I go to the live-Measure…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1088,"like_count":2,"has_summary":false,"last_poster_username":"Lucid3y3","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":632,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43},{"extras":"latest","description":"Most Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Daily Timer Output Error","id":1785,"title":"Daily Timer Output Error","slug":"daily-timer-output-error","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2024-02-10T09:28:45.242Z","last_posted_at":"2024-02-10T12:47:59.037Z","bumped":true,"bumped_at":"2024-02-10T12:47:59.037Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have set up a daily timer trigger span for the grow lights, testing it with a LED on GPIO. \nIt doesn’t turn on. \nI get this in the daemon log: \n\n2024-02-10 16:22:00,241 - DEBUG - mycodo.controllers.controller_trigger_4…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":17,"name":"function","slug":"function"},{"id":18,"name":"output","slug":"output"}],"tags_descriptions":{},"views":266,"like_count":1,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":545,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Pathspec ‘mycodo_docker’ did not match any file(s)","id":1769,"title":"Pathspec 'mycodo_docker' did not match any file(s)","slug":"pathspec-mycodo-docker-did-not-match-any-file-s","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2024-01-27T12:04:27.701Z","last_posted_at":"2024-01-27T16:31:21.224Z","bumped":true,"bumped_at":"2024-01-27T16:31:21.224Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m following this guide Mycodo and Docker · kizniche/Mycodo Wiki · GitHub \nI get stuck here \nbristolfish@Mycodo:~/mycodo-docker $ cd Mycodo/\nbristolfish@Mycodo:~/mycodo-docker/Mycodo $ ls\nalembic_db          DOCKER.md  …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":307,"like_count":0,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":619,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"How to turn off self-calibration for the MH-Z19B co2 sensor?","id":1745,"title":"How to turn off self-calibration for the MH-Z19B co2 sensor?","slug":"how-to-turn-off-self-calibration-for-the-mh-z19b-co2-sensor","posts_count":9,"reply_count":4,"highest_post_number":9,"image_url":"https://forum.radicaldiy.com/uploads/default/optimized/2X/7/7aef813a6cf3b4d42fdf6ce5621a0be78504c377_2_1024x392.png","created_at":"2024-01-16T18:11:28.459Z","last_posted_at":"2024-01-18T17:20:05.578Z","bumped":true,"bumped_at":"2024-01-18T17:20:05.578Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My CO2 graph isn’t looking healty, before I got some nice periodical spikes which triggered an air exchange, but overtime the Co2 sensor seems to have mostly flatlined. \n  \nI suspect the automatic self-calibration of thi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"},{"id":50,"name":"question","slug":"question"}],"tags_descriptions":{},"views":552,"like_count":0,"has_summary":false,"last_poster_username":"Talvara","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":597,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Recently updated and now webportal is very slow","id":1746,"title":"Recently updated and now webportal is very slow","slug":"recently-updated-and-now-webportal-is-very-slow","posts_count":12,"reply_count":4,"highest_post_number":12,"image_url":null,"created_at":"2024-01-16T18:36:59.316Z","last_posted_at":"2024-01-18T02:56:16.506Z","bumped":true,"bumped_at":"2024-01-18T02:56:16.506Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been using version 8.14.2 for about a year+ with good results, using Influx 1. \nI recently installed the newest version (8.15.3) on a fresh SD card and exported my settings from the previous version to the new ver…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":445,"like_count":5,"has_summary":false,"last_poster_username":"BossMyco","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":379,"primary_group_id":41,"flair_group_id":41},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"L298N DC Motor Controller stays turned on","id":1738,"title":"L298N DC Motor Controller stays turned on","slug":"l298n-dc-motor-controller-stays-turned-on","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":"https://forum.radicaldiy.com/uploads/default/original/2X/e/eb069cbd741f011be1716e9105598f35a2d81700.png","created_at":"2024-01-07T15:26:15.345Z","last_posted_at":"2024-01-13T10:07:21.726Z","bumped":true,"bumped_at":"2024-01-13T10:07:21.726Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI faced strange behavior of the L298N Output. I use a a Daily Time point as trigger, see below: \n  \nI expect that both outputs getting turned off after 60s or in case of the L298N after dispensing 10l. In case of my…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":18,"name":"output","slug":"output"}],"tags_descriptions":{},"views":303,"like_count":0,"has_summary":false,"last_poster_username":"jobroe","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":625,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Unable to install cv2 dependency for urllib","id":1718,"title":"Unable to install cv2 dependency for urllib","slug":"unable-to-install-cv2-dependency-for-urllib","posts_count":8,"reply_count":5,"highest_post_number":8,"image_url":null,"created_at":"2023-12-09T23:06:31.016Z","last_posted_at":"2023-12-19T21:38:17.098Z","bumped":true,"bumped_at":"2023-12-19T21:38:17.098Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m wanting to use an I.P. camera but can’t seem to get the library to work. I initially tried the urllib camera install (from the “More” menu) on a copy of my test setup with several hardwired and MQTT enabled sensors, …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":891,"like_count":1,"has_summary":false,"last_poster_username":"Billjuv","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":610,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43},{"extras":null,"description":"Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sensors stop giving readings after an hour or so, wont reinitialize","id":1682,"title":"Sensors stop giving readings after an hour or so, wont reinitialize","slug":"sensors-stop-giving-readings-after-an-hour-or-so-wont-reinitialize","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2023-11-15T14:02:14.034Z","last_posted_at":"2023-11-24T21:36:15.559Z","bumped":true,"bumped_at":"2023-11-24T21:36:15.559Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Cross posting here from github, as i didn’t get a response and this is giving me fits, TYIA for any suggestions or advice, and thanks for putting together and continuing to support this amazing project! \n… original post …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":655,"like_count":2,"has_summary":false,"last_poster_username":"Lucid3y3","category_id":19,"op_like_count":1,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":605,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":597,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":573,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"SHT-31 temp/humidity sensor shows Temperature but not humidity. debug log does show a humidity value","id":1670,"title":"SHT-31 temp/humidity sensor shows Temperature but not humidity. debug log does show a humidity value","slug":"sht-31-temp-humidity-sensor-shows-temperature-but-not-humidity-debug-log-does-show-a-humidity-value","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://forum.radicaldiy.com/uploads/default/optimized/2X/1/18597a1dacd4fadc40f273ced053b5a61de3b0cd_2_1023x263.png","created_at":"2023-11-03T15:28:58.321Z","last_posted_at":"2023-11-03T15:37:45.948Z","bumped":true,"bumped_at":"2023-11-03T15:37:45.948Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve hooked up a SHT-31 sesnor via the I2C and I can see in the debug log that it is getting a value for humidity, but when I look at the live reading it reports no data. \n  \nheres the line the debug spits out: \n\n2023-11…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":16,"name":"input","slug":"input"}],"tags_descriptions":{},"views":369,"like_count":1,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":597,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Dependencies Highcharts-Stock-9.1.2 and others still required to install after installation","id":1642,"title":"Dependencies Highcharts-Stock-9.1.2 and others still required to install after installation","slug":"dependencies-highcharts-stock-9-1-2-and-others-still-required-to-install-after-installation","posts_count":2,"reply_count":1,"highest_post_number":2,"image_url":null,"created_at":"2023-10-18T17:03:09.490Z","last_posted_at":"2023-10-18T23:18:32.021Z","bumped":true,"bumped_at":"2023-10-19T18:33:35.046Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Dear Mycodists, \nI have the problem of the topic, where I installed dependencies, which do not work afterwards. depency update still required. \nmycodo dependencies log: \n[2023-10-18 18:56:52]   inflating: Highcharts-Stoc…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":26,"name":"widget","slug":"widget"}],"tags_descriptions":{},"views":420,"like_count":3,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":2,"pinned_globally":false,"featured_link":null,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":507,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Refreshing conditional settings","id":1605,"title":"Refreshing conditional settings","slug":"refreshing-conditional-settings","posts_count":11,"reply_count":1,"highest_post_number":11,"image_url":null,"created_at":"2023-08-11T13:04:19.746Z","last_posted_at":"2023-08-11T17:36:36.927Z","bumped":true,"bumped_at":"2023-08-11T17:36:36.927Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an issue with my Conditional Controller: when I analyse the logs, I have some times unexpected “Refreshing conditional settings” which relaunch the class object and so run again the class init method, which is cat…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":17,"name":"function","slug":"function"}],"tags_descriptions":{},"views":391,"like_count":0,"has_summary":false,"last_poster_username":"KyleGabriel","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":423,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":43,"flair_group_id":43}]},{"fancy_title":"Error - mycodo.inputs.mycodo_ram_6caa407a - (not found by is_enabled)","id":1543,"title":"Error - mycodo.inputs.mycodo_ram_6caa407a - (not found by is_enabled)","slug":"error-mycodo-inputs-mycodo-ram-6caa407a-not-found-by-is-enabled","posts_count":10,"reply_count":6,"highest_post_number":10,"image_url":null,"created_at":"2023-05-30T23:40:00.533Z","last_posted_at":"2023-08-07T16:00:09.021Z","bumped":true,"bumped_at":"2023-08-07T16:00:09.021Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I got my system up and running yesterday to test.  Humidity was under control for several hours, but in the middle of the night control was lost and humidity went to 100% or so the sensor says.  Now, opened tent to clear…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":469,"like_count":1,"has_summary":false,"last_poster_username":"Lucid3y3","category_id":19,"op_like_count":0,"pinned_globally":false,"featured_link":null,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":548,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":279,"primary_group_id":null,"flair_group_id":null}]}]}}